Dryer Control Module Repair in Warsaw
Dryer doesn’t start, stops halfway through a cycle, shows an error code, or the buttons stop reacting? The control module — the electronic board that controls heating, drum movement, pump, and sensors — is often behind it. Voltage spikes, damp, and plain wear can damage the board. We repair modules at component level on site across Warsaw — in many cases for less than full replacement.
Cost
Price depends on the model and how involved the fault is. Repairing components costs far less than buying a new module. See the table for prices.
| Service | min | max |
|---|---|---|
| Belt replacement (dryer) | 300 zł | 350 zł |
| Rollers / bearings replacement (dryer) | 350 zł | 500 zł |
| Heating element replacement (dryer) | 350 zł | 450 zł |
| Fan replacement (dryer) | 300 zł | 400 zł |
| Condensate pump replacement (dryer) | 300 zł | 400 zł |
| Control module repair (dryer) | 450 zł | 600 zł |
How it works
- You tell us what’s happening.
- The technician checks the model.
- Disconnects power and takes the unit apart to reach the board.
- Does a visual check.
- Runs diagnostics with a multimeter.
- Replaces faulty components or swaps the whole module.
- Runs a test drying cycle.
Mistakes
- Ordering a new module right away.
- Trying to reset it by unplugging it.
- Using second-hand boards.
- No surge protection installed.
- Skipping lint filter cleaning — the board runs too hot.
Preparation
- Dryer model.
- Error code.
- Description of the problem.
- Unplug the machine.
- Make space for access.
- Photo of the model sticker.
- Any power surges?
- Working socket for testing.
Case from Warsaw
Client in Wilanów: Samsung dryer was freezing after 20 minutes — the display went black and the machine stopped. Inspection of the board showed an overheating transistor — the thermal paste had dried up. We replaced the transistor and renewed the thermal interface. Then we ran a 2-hour test cycle with no interruptions. The repair took 1.5 hours.
FAQ
What can be repaired?
Relays, capacitors, transistors, regulators. 60–70% can be fixed at component level.
Freezing = module?
Often yes, but it may also be a sensor.
DIY?
No — 220V and charged capacitors.
Time?
1–3 hours.
Brings parts?
Yes.
Brands?
Bosch, Samsung, LG, Electrolux, Beko, Whirlpool, AEG.
Repair or replace dryer?
Repair makes sense if it’s under 8 years old.
Protection?
Use a surge protector and keep the filters clean.
Reflash?
Yes.
Who does the work
Module repairs are handled by technicians with electronics experience. We cover all of Warsaw. Dryer acting up? Call us.