Glass-Ceramic Surface Replacement for Electric Cooktop in Warsaw
25.03.2026Glass-Ceramic Surface Replacement for Electric Cooktop in Warsaw
Has the glass-ceramic surface cracked, chipped or developed a spider web pattern? Using a cooktop with damaged glass is dangerous — moisture can reach the heating elements through cracks, risking a short circuit. The crack also expands over time from thermal cycling. We replace glass-ceramic surfaces on site across Warsaw — sourcing original or compatible glass for your model.
How much does it cost
The cost depends on the cooktop size, glass availability and model. The glass is the most expensive component, so sometimes replacement approaches the cost of a new cooktop. The technician will assess value on site. Prices in the table.
| Service | min | max |
|---|---|---|
| Burner / heating zone replacement (electric cooktop) | 300 zł | 400 zł |
| Relay / sensor replacement (electric cooktop) | 300 zł | 400 zł |
| Glass-ceramic surface replacement (electric cooktop) | 300 zł | 450 zł |
| Power module replacement (electric cooktop) | 450 zł | 600 zł |
| Electronics repair (electric cooktop) | 450 zł | 550 zł |
How the replacement works
- You describe the damage.
- The technician identifies the model and orders the glass (3–7 days if not in stock).
- We switch off the breaker.
- The cooktop is removed and the damaged glass carefully separated from the frame.
- The frame is cleaned and new heat-resistant sealant applied.
- The new glass is fitted, pressed and secured.
- The cooktop is refitted and all zones tested.
Common mistakes
- Cooking on a cracked surface — short-circuit and shock risk.
- Ordering glass by ruler measurements — exact model number needed.
- Trying to glue the crack — no adhesive withstands the temperature.
- Fitting regular glass instead of glass-ceramic — it will shatter.
- Dropping heavy cookware — the main cause.
- Placing hot pans on a cold zone — thermal shock.
What to prepare
- Exact cooktop model.
- Photo of the damage.
- Do not use the cooktop!
- Switch off the breaker.
- Clear the worktop.
- Confirm the cooktop can be removed.
- Collect fragments if any.
- Space for work next to the worktop.
A real case from Warsaw
A client in Wola dropped a cast-iron skillet on a Siemens cooktop — the glass cracked from centre to edge. The cooktop was 4 years old with working electronics and burners. We ordered genuine glass (arrived in 5 days), removed the cooktop, separated the old glass, cleaned the frame, applied sealant and fitted the new glass. All zones working. On-site work took about 1.5 hours. The client saved significantly compared to buying a new cooktop. Tip: never place heavy cast iron edgewise on glass-ceramic.
FAQ
Is it dangerous to use with a crack?
Yes — moisture can reach elements, risking short circuit and electric shock.
Can the crack be glued?
No — no adhesive withstands temperatures up to 600°C.
Replace glass or buy a new cooktop?
Depends on the model. For premium brands, replacement is usually cheaper. The technician will advise.
How long for the glass to arrive?
Popular models 3–5 days. Rare models up to 2 weeks.
Why does glass-ceramic crack?
Heavy impact, thermal shock (cold water on hot zone), point loads.
Does the technician bring the glass?
Glass is ordered after confirming the model. We return when it arrives.
Does the cooktop need removing?
Yes, to separate the glass and apply new sealant.
Which brands?
Bosch, Siemens, Electrolux, Samsung, Beko, Amica, Whirlpool, Gorenje, Hansa.
How long on site?
1–2 hours.
Warranty?
Yes, on labour and glass.
Who does the work
Glass-ceramic replacements are carried out by experienced cooktop technicians. We cover all of Warsaw. Glass cracked? Call us — we’ll assess and replace.