DIY repairs

How to Install a Curtain Rod or Roller Blind — a Practical Guide

A curtain rod or roller blind looks like a simple two-screw job. In practice, a few details determine whether the window looks tidy and the mechanism works smoothly for years — or jams within a week.

Mounting Options — Decide Before You Drill

There are four common ways to mount a curtain rod or blind:

  • Wall mount above the window — the most common; requires wall plugs in plaster or concrete.
  • Ceiling mount — good for recessed windows or low lintels; brackets face upward.
  • Inside the window frame (no wall drilling) — suits day-night blinds and venetian blinds; screws go into the wooden or PVC frame.
  • No-drill (clamp or adhesive) — temporary solution for light blinds or during renovation.

What to Prepare

  • Tape measure and pencil
  • Spirit level
  • Drill with the correct bit
  • Wall plugs and screws (often included in the kit, but check their quality)
  • Screwdriver or power driver

Installing a Curtain Rod — Step by Step

  • Measure and mark. The rod should extend 15–20 cm beyond each side of the window so the curtain does not block the glass. Mark both bracket positions.
  • Check the level. Both brackets must be at the same height. Measure down from the ceiling on both sides or use a spirit level across both marks.
  • Drill and plug. Usually two holes per bracket. Aim for at least 40 mm depth in a load-bearing wall.
  • Attach the brackets. Screw them in loosely, recheck level, then tighten fully.
  • Fit the rod and hang the curtains. The rod should slide freely in the brackets. If it feels stiff, loosen the locking screw slightly.

Roller Blinds — What Is Different

Roller blinds use flat brackets mounted to the ceiling or inside the reveal. Key point: check which side the control mechanism is on — cord or chain. In narrow rooms or windows close to a side wall, it is easy to overlook this before buying and impossible to change afterwards.

When mounting inside a PVC frame, use plastic-specific self-tapping screws. Standard wood screws can crack the profile.

Common Mistakes

  • Brackets too close to the window — the curtain rubs against the sill or radiator.
  • Brackets at different heights — the rod sits crooked and the curtain slides to one side.
  • Weak plugs in drywall — the blind falls off within weeks.
  • No centre bracket on a long rod (over 180 cm) — the pole bends under the weight of heavy curtains.

When to Book a Handyman

If you have several windows to sort at once, uncertain wall condition, or non-standard measurements — leave a request through the form on the site. We work across Warsaw and pricing depends on the number of windows and fixing type.

Don’t want to lose this guide? Save the page to your phone or computer to return to it quickly later.

Share on Telegram

← All guides