Kitchen Cabinet Hinge Replacement in Warsaw
If a kitchen cabinet door is dropping, won’t shut right, or squeaks whenever you open it — in 90% of cases the issue is the hinges. European cabinet hinges (Blum, Hettich, GTV) are rated for 50,000–80,000 cycles, but in kitchens they wear sooner because of moisture, grease, and constant use. Swapping one hinge takes 10–15 minutes, and the effect can make the kitchen feel almost new again. We cover all of Warsaw and come with a selection of hinges and the right tools.
How much does it cost and what affects the price
The replacement cost depends on how many hinges need changing, what mechanism they use, and the manufacturer. Hinges come in three versions: full overlay, half overlay, and inset — each made for a different way of fitting the door. There’s also the soft-close version with a built-in damper, so the door shuts gently and quietly. Fixings are included in the service price. The hinges themselves are billed separately if new ones are required. Up-to-date prices for all kitchen services are listed in the table below.
| Service | min | max |
|---|---|---|
| Kitchen furniture installation (complete set) | 20% od ceny | 25% od ceny |
| Kitchen base cabinet installation | 250 zł | 400 zł |
| Wall cabinet installation | 250 zł | 400 zł |
| Kitchen cabinet door adjustment | 80 zł | 150 zł |
| Hinge replacement | 60 zł/szt | 120 zł/szt |
| Kitchen countertop installation | 200 zł/mb | 350 zł/mb |
| Laminate countertop installation | 150 zł/mb | 250 zł/mb |
| Composite countertop installation | 250 zł/mb | 400 zł/mb |
| Countertop joining | 190 zł/szt | 300 zł/szt |
| Countertop cutout (sink / hob) | 120 zł/szt | 200 zł/szt |
How on-site hinge replacement works
- You send a photo of the kitchen and explain the issue — sagging door, squeaking, won’t stay shut.
- The technician checks how many doors there are and what hinge type is fitted (the brand can often be seen in the photo).
- We set a time — visits are often arranged for the same day or the next day.
- On site, the technician takes off the door and checks the condition of the mounting plate and hinge cup.
- Fits new hinges and adjusts them in three directions: up-down, left-right, and depth against the cabinet body.
- Checks that the door closes evenly, without gaps, and lines up flush with the neighbouring doors.
- If the hinges have soft-close — tests how they shut. Cleans up after the job.
Signs of worn hinges — when it’s time to replace
- The door has dropped and rubs on the cabinet below or the worktop.
- The door no longer closes all the way — the spring is weak and doesn’t hold.
- You hear squeaking, grinding, or clicking when opening or closing it.
- The soft-close no longer works — the door bangs shut instead of closing gently.
- The hinge cup has split or pulled out of the chipboard — you can see chipping around the fixing point.
- Uneven gaps have shown up between doors that used to line up properly.
Common DIY mistakes
- Buying the wrong hinge type — full overlay instead of half overlay, so the door doesn’t sit right.
- Not checking the cup diameter — the standard is 35 mm, but some smaller doors use 26 mm.
- Putting screws back into old holes — the chipboard is already worn out and the fixing won’t grip.
- Skipping adjustment after fitting — the door hangs crooked and catches on the one next to it.
- Installing hinges without soft-close in a kitchen where all the others have it — one door slams while the rest close quietly.
- Using cheap no-name hinges — the spring goes weak again within six months.
What to prepare before the technician arrives
- Take a close photo of the hinge — that helps the technician recognise the type and brand.
- Count how many doors need attention — often the issue affects more than one.
- Empty the cabinets if the doors will need to be removed fully.
- Check whether you have spare hinges (sometimes there are leftovers from the original kitchen installation).
- If you know the kitchen manufacturer (IKEA, Nolte, Nobilia) — tell the technician.
- Make sure the cabinets are easy to reach — move chairs and stools out of the way.
- Have a power socket free near the kitchen for charging a cordless drill battery.
- Send intercom and parking details.
A real case from Warsaw
A client in Praga-Południe had this issue: four upper cabinet doors in an IKEA kitchen (METOD series) were sagging. The kitchen was 7 years old and still had the original IKEA UTRUSTA 153-degree hinges. During inspection, it turned out the spring mechanisms had weakened, and on two hinges the plastic clips connecting to the mounting plate had cracked. The technician changed all 8 hinges (2 per door) to Blum Clip Top hinges with integrated Blumotion soft-close. The work took about an hour. After adjustment, all doors were perfectly aligned with even gaps and closed smoothly and quietly. The client said the kitchen looked like the whole fronts had been replaced — even though only the hinges were changed.
Frequently asked questions
Can hinges be replaced without changing the door?
Yes, in most cases the hinges can be replaced on their own. The door is taken off, a new hinge is installed, and the door is put back.
Will Blum hinges fit an IKEA kitchen?
Yes, Blum Clip Top hinges work with IKEA METOD mounting plates. Hettich and GTV with a 35 mm cup fit as well.
How many hinges does one door need?
The standard setup is 2 hinges. Doors taller than 100 cm need 3 hinges to spread the weight evenly.
What if the screw holes in the chipboard are stripped?
The technician fills the old holes with glue and wooden dowels, then drills fresh ones once everything has dried. This is a normal repair method.
Can soft-close be added to existing hinges?
If the hinges are Blum or Hettich — yes, clip-on dampers can be added. Cheap hinges don’t support add-on dampers — then full replacement is needed.
Do you bring hinges with you?
The technician can bring standard Blum, Hettich, or GTV hinges. For uncommon models, it’s better to buy them in advance.
How quickly can you come?
Often the same day or the following day. Call or message us to arrange a visit.
Who does the work
Kitchen hinge replacement and adjustment is done by technicians with hands-on experience in Blum, Hettich, GTV, and Häfele cabinet hardware. We work across all of Warsaw and nearby areas — from Ursynów to Bielany. Minimum order from 200 zł. Call or message us — we’ll check the scope of work and quote the price.