Squeaky Door Fix in Warsaw — Silence in 15 Minutes

A squeaky door gets on your nerves straight away — especially at night when you head to the kitchen and wake up the whole flat. In most cases the issue sits in the hinges: the lubricant has dried up, dust has got inside, or corrosion has begun. Sometimes one drop of oil does the job; sometimes the pin has to be removed, cleaned, and greased again. We deal with squeaky doors all over Warsaw — we come out, find the cause and restore quiet in one visit. If the hinges are too far gone for lubrication to make a difference, we change them there and then.

How much does door lubrication cost and what affects the price

The price depends on how many doors need work and what state the hinges are in. An easy job means hinges that are still fairly sound and have only dried out: one shot of silicone, a few opens and closes, and the job is finished in five minutes. A harder job means rusty hinges with a stuck pin — the leaf must be removed, the pin driven out, all parts cleaned, packed with lithium grease and put back together. If the hinges are worn out, changing them is more sensible than trying to save them.

Lubricant and small consumables are already included in the labour price. If the hinges have to be replaced, the hardware is billed separately. If we service several doors in the same flat, the price per door drops. You can see the current rates in the table below (compatible with Porta, VOX, Erkado and similar).

Service	min	max
Door adjustment Book this service →	30 zł	60 zł
Squeaky door lubrication Book this service →	40 zł	80 zł
Lock replacement Book this service →	180 zł	350 zł
Door handle replacement Book this service →	80 zł	150 zł

Send us a message — the technician can tell you what your door is likely to need before he even heads over.

How door lubrication works: step by step

A squeak is only a sign — the reason behind it can be different. This is how the technician handles it on site:

1. Diagnosis. The technician opens and closes the door to find exactly which hinge is squeaking — upper, lower or both. He also checks for looseness, poor alignment, or the leaf scraping the frame.
2. Choosing the method. If the hinge is still in decent shape, silicone lubricant goes straight onto the pin without taking the leaf off. If the pin is dry and corroded, the leaf has to be removed.
3. Removing the door leaf. The leaf is lifted off the hinges. If the hinges are tight, a wooden wedge and a mallet underneath usually sort it out.
4. Extracting the pin. The pin is tapped out upward from below with a thin drift punch. If it has seized, a penetrating spray such as WD-40 is used first and left for 5-10 minutes.
5. Cleaning and lubricating. The pin and the inside of the hinge barrel are cleared of old grease, dust and rust. Lithium or silicone grease is then applied — it stays in place for months, unlike WD-40, which disappears after a couple of weeks.
6. Reassembly and check. The pin is fitted back, the leaf is hung again and the door is tested. We open and shut it 10-15 times — there should be no squeak. If something still is not right, we do the process again.

One door takes 10-20 minutes. If there are a few of them, we often get everything done within an hour.

Common mistakes when lubricating doors yourself

Greasing a hinge sounds simple. But here is what often goes wrong:

• Using WD-40 as a permanent lubricant. WD-40 is a penetrating fluid, not proper lubricant. It pushes out moisture and frees rust, but it evaporates in 1-2 weeks. Then the squeak comes back and the hinge has no protection left. What you need is lithium or silicone grease.
• Dripping oil on top of dirt. If the hinge is packed with dust and old grease, fresh oil only combines with the dirt and turns into abrasive paste. The hinge needs cleaning first.
• Lubricating the wrong hinge. The top hinge squeaks, but the oil goes into the bottom one. Or both get oiled, but the gap between the pin and barrel is missed — then the oil runs down the door and onto the floor.
• Pouring in cooking oil. Vegetable oils go thick, smell off and pull in dust. A month later the hinge squeaks even more, with sticky residue all around it.
• Removing the leaf without a helper. An interior door weighs 15-25 kg; a front door can be up to 80 kg. Without another person, it is easy to drop the leaf and damage the floor or your foot.
• Hammering the pin back without a buffer. A direct hit mushrooms the top of the pin, so next time it cannot be removed.
• Skipping the alignment check. Sometimes the squeak is not from dry hinges at all, but from a twisted frame or a sagging leaf. Lubrication will not solve that — the door needs adjustment.

What to prepare before the technician arrives

Lubricating hinges is a quick and tidy job, but a few simple steps will make the visit faster:

• Figure out which doors are squeaking — that way the technician does not have to test every single one.
• Clear the area in front of and behind the door — there needs to be space for a full swing and for lifting the leaf off.
• If the door is heavy (front door, solid timber) — tell us beforehand so the technician can bring a helper or a jack.
• Move rugs and breakable items away from the door — once the leaf comes off, anything nearby can get damaged.
• If you know the hinge brand, tell the technician — he will bring matching spare parts in case replacement is needed.
• Write down all door issues: squeak, play, stiffness, sagging. We can sort everything in one visit.
• Give the entry code and floor number when booking — it saves time at the intercom.
• If you have pets, keep them in another room while the door is off its hinges.
• Decide whether you want extra work done: closer adjustment, handle replacement, leaf trimming. The technician can take care of it all in one trip.

A real case: five doors in Ursynow

A client in Ursynow said that all five interior doors in his flat were squeaking. The building is from 2005; the doors are standard laminate on lift-off hinges. It turned out the hinges had not been lubricated once in 20 years — the pins were completely dry and two showed surface rust. We took off every leaf, drove out the pins, cleaned away the dust and oxidation, and applied lithium grease. Two hinges on the balcony door had clear play, so we replaced them with new ones in the same standard.

The whole job took a little over an hour. The client said it was the first time in years he could shut the children’s room at night without sound effects. The lesson is simple: hinges are a wear part and need servicing every year or two. If you deal with it in time, lubrication fixes the issue in minutes. If you leave it for too long, replacement may be the only answer.

Who does the work and what guarantees we offer

Door lubrication and adjustment are done by technicians who deal with door hardware every day — hinges, locks, closers, handles. We come equipped with a full set of lubricants (silicone, lithium, penetrating sprays), drift punches, and spare hinges in the most common standards. We work across all of Warsaw and nearby areas — from Bemowo to Praga Poludnie. After our visit the door will move quietly and smoothly. If the squeak returns during the warranty period, we come back and sort it free of charge. To book, message us — we usually reply within an hour.