Washing Machine Control Module Repair in Warsaw
Washing Machine Control Module Repair in Warsaw
Washer dead, stopping halfway through the programme, all lights blinking or showing an odd error? The control module runs the whole machine: water fill, heating, spin, drain, door lock. Voltage spikes, damp and normal wear lead to faults. We fix modules at component level on site across Warsaw — 60–70% of cases cost less than replacement.
Cost
Repairing components costs less than fitting a new module. See prices in the table.
| Service | min | max |
|---|---|---|
| Drain pump replacement (washing machine) | 250 zł | 350 zł |
| Heating element replacement (washing machine) | 250 zł | 320 zł |
| Water inlet valve replacement (washing machine) | 250 zł | 300 zł |
| Shock absorber replacement (washing machine) | 300 zł | 400 zł |
| Belt replacement (washing machine) | 250 zł | 300 zł |
| Bearing replacement (washing machine) | 550 zł | 660 zł |
| Door lock replacement (washing machine) | 250 zł | 300 zł |
| Control module repair (washing machine) | 400 zł | 550 zł |
How it works
- You explain the fault — won’t start, stops, flashing lights, error codes.
- We disconnect power, remove the top, and take out the board.
- Visual check — bulging capacitors, signs of overheating.
- Diagnostics with a multimeter.
- We replace the failed components.
- Reassembly and a full cycle test.
Mistakes
- Ordering a new module straight away.
- Trying to reset it by unplugging.
- Using second-hand boards.
- No protection against power surges.
- DIY repair — capacitors stay charged.
Preparation
- Model number.
- Error code.
- Fault description.
- Unplug the machine.
- Access to the top.
- Photo.
- Any surges?
- Working socket for testing.
Case from Warsaw
Client in Bielany: Bosch — all indicators blinked, then went dark after 5 seconds. The board had two swollen capacitors and a burnt relay. We changed three components. Full cycle — no errors. 1.5 hours. 4x cheaper than a new module.
FAQ
What can be repaired?
Capacitors, relays, transistors, regulators, microcontrollers.
All indicators flashing?
Often it’s the module, but the wiring can also be the cause.
DIY?
No — capacitors can stay charged.
How long?
1–3 hours.
Do you bring parts?
Yes.
Brands?
Bosch, Samsung, LG, Electrolux, Beko, Whirlpool.
Repair or replace?
Repair makes sense if the machine is under 8 years old.
Reflash?
Yes, if the firmware is damaged.
Protection?
Use a surge protector.
Warranty?
Yes.
Who does the work
Module repairs are done by technicians with soldering stations. We cover all of Warsaw. Washer not starting? Call us.