Clothes dryer mount and curtain rod repair in Warsaw
28.03.2026Clothes dryer mount and curtain rod repair in Warsaw
The ceiling-mounted clothes dryer has sagged and no longer holds laundry. The curtain rod fell off, taking a chunk of plaster with it. Or you have just moved into a new flat in Ursynow and want everything hung at once — a dryer in the bathroom, curtain rods in the bedroom and living room. A single technician visit solves both tasks: the dryer will hold securely and the curtain rod won’t come down after a month. We work across all of Warsaw — from Mokotow to Bielany.
How much does dryer and curtain rod installation cost
Current prices are in the table below. The cost depends on the wall type (concrete, brick, plasterboard), curtain rod length, dryer model, and ceiling height. Fixings are included in the service price. The dryer, curtain rod, and curtains themselves are charged separately. If the wall is damaged from old fittings, repair of the mounting point is included in the work.
| Service | min | max |
|---|---|---|
| Clothes dryer mounting | 120 zł | 250 zł |
| Curtain rod repair | 80 zł | 150 zł |
How the installation works
- You describe the task — what needs hanging — and send a photo of the wall or ceiling.
- The technician confirms the mounting type, wall material, and dryer or rod model.
- On site, the technician marks mounting points using a spirit level.
- Drills holes and installs wall plugs — selecting the right type for the wall material.
- Fits brackets and secures the dryer or curtain rod.
- Tests strength — hangs a load to make sure the structure is solid with no play.
- Cleans up drilling dust and debris.
Common DIY mistakes
- Fixing a dryer to a plasterboard ceiling with no noggins — within a week it tears out, taking a chunk of board with it.
- Using screws instead of wall plugs in concrete — the curtain rod only holds for a few days.
- Not checking level — the rod hangs crooked and curtains slide to one side.
- Buying a ceiling dryer for a wall mount or vice versa — the structures and fixings are different.
- Drilling straight into a heating pipe or cable — not checking what runs inside the wall.
- Skimping on brackets — fitting two instead of three on a long rod, which then sags.
- Ignoring the weight of wet laundry — the dryer is rated for 15 kg but loaded with 25.
What to prepare before the technician arrives
- Decide on the exact mounting location for the dryer or curtain rod.
- Buy the dryer and rod in advance, or confirm the model with the technician.
- Check the package contents — brackets, fixings, instructions.
- Measure the window opening length (add 15–20 cm on each side for the rod).
- Clear access to the wall or ceiling — move furniture and remove curtains.
- Find out the wall material — concrete, brick, plasterboard (if you know).
- Photograph the mounting location and send it to the technician.
- Have a power socket ready for the hammer drill.
- If there may be wiring in the wall — let the technician know.
- Provide access details: intercom code, parking info.
A real case from Warsaw
A client in the Wola district asked to mount a Vileda ceiling dryer in the bathroom and replace a curtain rod in the living room — the old one had fallen out with its wall plugs. The bathroom ceiling turned out to be plasterboard on a metal frame. The technician located the profiles with a detector and fixed the dryer directly into them — no additional noggins needed. In the living room, the wall was hollow brick — the previous installer had used standard plastic plugs, which had spun loose. The technician fitted toggle-bolt anchors and added a third bracket in the centre. The 3.2-metre rod now holds heavy curtains without bowing. The whole job took 1.5 hours.
Frequently asked questions
Can I mount a clothes dryer on a plasterboard ceiling?
Yes, provided we locate a metal profile in the frame and fix directly into it. If no profile is in the right spot, we use specialist plasterboard anchors that spread the load. We never hang from the board alone without reinforcement.
How long does it take to install one dryer?
Around 30–50 minutes on average. It depends on the ceiling type and whether any surface preparation is needed.
Ceiling dryer or wall-mounted — which is better?
A ceiling dryer saves more space and is more convenient in a small bathroom. A wall-mounted one is easier to install but takes up wall area. The technician will recommend the best option for your room.
How long can a curtain rod be without a centre bracket?
Up to 2 metres — two side brackets are usually enough. Over 2 metres, a centre bracket is essential to prevent sagging under the weight of curtains.
What if the old wall plug spins in the wall?
The technician will drill out the old hole and fit a larger plug, or shift the mounting point by 2–3 cm. The old hole is then filled and made good.
Can dryer and curtain rod installation be combined in one visit?
Yes, that is standard practice. One call-out saves money. Bundle all hanging tasks together: shelves, rods, dryers, mirrors.
Do you bring fixings with you?
Yes, standard fixings (wall plugs, screws, anchors) are included in the price. Specialist fixings for unusual walls are agreed in advance.
Do I need to remove the old curtain rod before you arrive?
No, the technician will remove it. Taking down a heavy rod at height on your own can be unsafe.
How quickly can you come?
Usually the same day or the next. Urgent call-outs carry a surcharge. Call or message us — we reply within an hour.
Do you offer a warranty on installation?
Yes, on the technician’s work. If a fixing loosens due to a mounting error, we’ll fix it free of charge. The dryer and curtain rod carry the manufacturer’s warranty.
Who does the work
Dryer and curtain rod installation is carried out by technicians experienced in hanging fixtures in all types of flats — from new-builds to pre-war tenement houses. We cover all of Warsaw and nearby suburbs. Call or message us — we’ll advise what to prepare and come at a convenient time.