Curtain Rail & Roller Blind Installation Warsaw — Prices & Service
You’ve bought curtain rails, roller blinds, or venetian blinds — now they need fitting to the wall without chipping the plaster or ending up uneven. We handle roller shutter installation and blinds fitting in Warsaw every day. Below you can see how the job goes and what the price looks like.
Curtain Rod Installation Warsaw Price — Current Rates
Prices depend on the kind of covering (curtain rail, roller blind, venetian) and the wall surface (concrete, brick, plasterboard). Here are the current rates for window covering installation in Warsaw.
| Service | min | max |
|---|---|---|
|
Roller shutter installation
Book this service → |
200 zł | 350 zł |
|
Blinds installation
Book this service → |
200 zł | 350 zł |
|
Curtain rod repair
Book this service → |
80 zł | 150 zł |
|
Roller blind cord / mechanism replacement
Book this service → |
120 zł | 250 zł |
|
Roller blind / venetian blind repair
Book this service → |
150 zł | 350 zł |
Mounting hardware (wall plugs, screws) is included. The curtain rail or blind itself is bought by the client — we help choose the right type and size. For combined curtain rod and dryer installation, check our multi-service option.
How We Install Curtain Rails and Blinds — Step by Step
Blind Fitting Service Warsaw — Our Process
- Measure and mark. We use a laser level to set out the bracket positions — even a 2mm difference is visible on a 2-metre rail.
- Drill and anchor. Concrete or brick gets suitable wall plugs. Plasterboard gets toggle bolts or dedicated cavity anchors. We choose the fixing to suit the wall.
- Mount brackets. Brackets are screwed in solidly, then we check the level again.
- Attach the rail or blind. The curtain rail is clicked or screwed onto the brackets. The roller blind cassette is snapped into place. Venetian blinds are fixed with clips.
- Test. Curtains are hung and pulled across. Blinds go up and down. The chain mechanism is checked to make sure it runs smoothly. We leave only when everything works properly.
Common Mistakes With Curtain Rails and Blinds
- Wrong anchors for plasterboard. A heavy curtain rail fixed with basic plastic plugs in a plasterboard wall will come loose within weeks. Cavity anchors or fixing into the lintel is a must.
- Not using a level. Guessing bracket positions by eye ends with a sloping rail. We always use a laser level.
- Drilling into concealed pipes or cables. Before drilling, we check for hidden services with a detector — especially above windows, where cables often run.
- Mounting roller blinds too close to the glass. If the blind catches on the window handle, it won’t open properly. We leave enough clearance.
- Forgetting the weight. Heavy blackout curtains need solid metal brackets and thicker rails. Light systems won’t carry that load.
What to Prepare Before the Handyman Arrives
No-Drill Curtain Rail Warsaw — Your Checklist
- Unpack the curtain rails or blinds and check that all parts are there (brackets, screws, end caps).
- Decide on the height: at ceiling level, above the window frame, or inside the window recess (for roller blinds).
- Know what kind of wall you have — concrete, brick, or plasterboard. If you’re not sure, we’ll check when we arrive.
- If you want no-drill mounting (tension rods), tell us in advance — they don’t work with every window type.
- Clear the area around the window so we can work without hassle.
Real Example — Blinds in a New Flat in Białołęka
A family who had just moved into a new flat in Białołęka needed roller blinds in 5 rooms and curtain rails in the living room and bedroom. We fitted 7 roller blinds (recess-mounted, with no drilling into the frame), 2 ceiling-mounted curtain rails (3m each), and checked every mechanism. The flat went from bare windows to fully finished in around 3 hours.
FAQ — Curtain Rail and Blind Installation in Warsaw
How long does it take to install one curtain rail?
One curtain rail takes 15–30 minutes depending on the wall type and rail length. Roller blinds: 10–20 minutes each.
Can you install blinds without drilling?
Yes — clip-on roller blinds fit onto the window frame without screws. Tension curtain rods also don’t need drilling. We’ll advise what will work with your windows.
Do you install electric roller blinds?
Yes. We fit the cassette, connect the motor, and pair the remote. If a power outlet is needed nearby, we can install one.
Why Hire a Handyman for Curtain and Blind Installation?
Straight rails, solid fixings, and blinds that actually run properly — that’s what you get when the job is done by a professional. We work across Warsaw and bring everything needed: laser level, drill, anchors, screwdriver. One visit, all windows sorted, no dust left behind.