Parquet sanding in Warsaw — restoration without replacement

The parquet has gone darker, collected scratches, and the finish is worn away — but the wood itself is still sound and can be brought back. Sanding takes off a thin top layer together with the old finish and exposes clean wood underneath. Once sanded, the floor looks like new again — it just needs lacquer or oil on top. It costs much less than a full replacement and usually takes only one to two days. We sand parquet all over Warsaw — from Stary Mokotów to Bródno.

Sanding cost

The cost is based on the floor area, the state of the parquet, and how many layers of old finish are on it. Current rates are shown in the table. Lacquer or oil is charged separately (you can order it together).

Service	min	max
Floor panel removal Book this service →	15 zł/m²	25 zł/m²
Floor panel installation Book this service →	70 zł/m²	90 zł/m²
Floor panel replacement Book this service →	70 zł/m²	100 zł/m²
Vinyl panel installation Book this service →	80 zł/m²	120 zł/m²
Baseboard installation Book this service →	30 zł/mb	45 zł/mb
Baseboard removal Book this service →	15 zł/mb	25 zł/mb
Old flooring removal Book this service →	12 zł/m²	20 zł/m²
Carpet installation Book this service →	35 zł/m²	60 zł/m²
PVC flooring installation Book this service →	45 zł/m²	75 zł/m²
Glue-down flooring installation Book this service →	45 zł/m²	75 zł/m²
Parquet sanding Book this service →	70 zł/m²	110 zł/m²
Parquet varnishing Book this service →	45 zł/m²	75 zł/m²
Parquet oiling Book this service →	55 zł/m²	90 zł/m²
Parquet gap filling Book this service →	25 zł/m²	45 zł/m²
Floor threshold installation Book this service →	180 zł	300 zł
Door trimming after floor installation Book this service →	120 zł	250 zł

How the sanding process works

1. Inspection: how deep the damage is, how much wood thickness is left, and the condition of individual blocks.
2. The room is emptied; sockets and door frames are covered with sheeting and taped up.
3. Coarse sanding — strips off old lacquer/oil and evens out the surface (40–60 grit).
4. Medium sanding — takes out the scratches left by the first pass (80–100 grit).
5. Fine sanding — gets the surface ready for the finish (120–150 grit).
6. Edges and difficult spots are finished with a hand-held edger.
7. Dust is vacuumed away and the surface is wiped down with a damp cloth.
8. Lacquer, oil, or wax is applied (often the next day).

Common mistakes

• Sanding too hard — takes off too much wood and leaves the parquet thin and weak.
• Skipping middle grits — the surface remains rough and the finish lays unevenly.
• Not vacuuming before finishing — dust gets trapped in the lacquer and the floor feels gritty.
• Sanding parquet that has no sanding life left — the wear layer is under 2 mm.

What to prepare

• Empty the room completely.
• Set any sticking-out nails flush with the surface (they will rip the abrasive).
• Make sure there is enough power supply (the sander pulls a lot of current).
• Let the neighbours know — it will be noisy (though modern machines do have dust extraction).
• Choose the finish: lacquer, oil, or wax.

A real case from Warsaw

An older flat in Mokotów, 45 m² of 1960s oak herringbone parquet. The lacquer was worn right through to bare wood in the walkways, and several blocks had come loose. The technician glued the loose blocks back down, filled the gaps, and went through three grits. The next day — two coats of polyurethane lacquer. Result: the parquet looks new again, the herringbone pattern stands out more clearly, and the grain really shows. The owners saved a lot of money — replacing parquet like this would have cost five times more (compatible with Quick-Step, Egger, Kronopol and similar).

Frequently asked questions

How many times can parquet be sanded?

That depends on the thickness. Solid parquet at 15 mm — three to four times over its lifetime. Engineered board with a 4 mm wear layer — once or twice.

How long does it take?

Sanding 20–30 m² — one day. Lacquering — one more day. The floor can handle foot traffic 24–48 hours after the final coat.

Will there be a lot of dust?

Very little. Modern machines come with built-in dust extraction and filters. But sheeting over the doorways is still necessary.

Book a sanding job

We’ll give your parquet a second life. We work across all of Warsaw — message us, and we’ll check the condition and arrange a date.