Old laminate may be swollen, split, or just past its best — getting to a new floor starts with proper removal. On paper it looks simple, but the job has its tricks: click-lock panels have to come apart in the right order, glued-down ones need lifting without chewing up the screed, and the underlay underneath usually has to come out as well. We work all over Warsaw — from Ochota to Targówek — and come fully equipped.

How much does it cost and what affects the price

Up-to-date prices are in the table below. The final cost is affected by the size of the area, the panel type (click-lock lifts faster, glue-down takes more time), and the state of the subfloor. Waste removal is priced separately. If you’re planning to install a new floor right after — doing both during one visit comes out cheaper.

How the on-site work goes

1. The technician checks the floor: panel type (click-lock, glue-down), skirting boards, and the condition of the subfloor.
2. Skirting boards are taken off — if they need to be reused, they are removed carefully from the wall.
3. Removal begins at the far wall and moves toward the door — click-lock panels are unclipped row by row.
4. The underlay is pulled up and discarded (unless it is going to be reused).
5. The subfloor is inspected: cracks in the screed, uneven spots, signs of moisture.
6. Waste is packed into bags and carried out (by arrangement).

Common mistakes during panel removal (and how to avoid them)

• Beginning in the middle of the room — this breaks the locking edges, so the panels can no longer be reused.
• Prying up glued-down panels with a crowbar — this damages the screed, which then has to be levelled.
• Skipping skirting board removal first — the panels will not release properly and the locks will snap.
• Leaving the old underlay under a new floor — it is already compressed and no longer cushions properly; the new laminate will start creaking.
• Not checking the screed after removal — moisture may have built up underneath, or mould may be present.
• Putting panels into general waste — laminate counts as construction waste; Warsaw has disposal rules.

What to prepare before the technician arrives

• Remove furniture from the room or at least move it against one wall.
• Turn off underfloor heating if you have it — the heating cable can be damaged during removal.
• Decide whether you want to save the panels for reuse.
• Agree who will take out the waste: the technician (for an extra fee) or you.
• If you want the new floor laid straight after — buy the material beforehand.
• Get heavy-duty waste bags ready.
• Pass on access details: intercom, parking, floor number.
• Let the neighbours know — removing glued panels can get noisy.

A real case from Warsaw

A flat in Praga-Południe, 45 m² — the owners had bought a resale property with 12-year-old laminate. The panels had lifted at the doorways and in the hallway; the click-lock joints had opened up in several spots. The technician removed the skirting boards and took up the laminate in under four hours. Under it was old polyethylene foam underlay, flattened almost completely — he removed all of it. The screed was in decent condition apart from one hairline crack, which he filled with a rapid-set compound. By the next morning, the owners were already installing new vinyl plank flooring on a clean, even base. The point: removing old laminate is not just about tearing it out — it is about getting the substrate ready for whatever comes next (compatible with Quick-Step, Egger, Kronopol and similar).

Frequently asked questions

Who does the work

Floor removal is done by flooring specialists. We know how to take apart every type of floor without damaging the base underneath. We work across all of Warsaw — call or message us, and we’ll check the scope and arrange a convenient date.