Furniture, door, window and floor protection with film in Warsaw
Before any painting or plastering starts, everything that must stay clean has to be covered: floors, furniture, windowsills, doors, sockets. There’s no skipping this — it’s a required part of the job. Without proper protection, one drop of paint on laminate flooring can end up costing more than painting the whole room. We do protective covering across Warsaw before every painting or plastering stage.
How much does it cost and what affects the price
You’ll find the current prices in the table below. The final cost is affected by the size of the area, the kind of protection used (painter’s film, cardboard for floors, masking tape), and how many items need covering. If protection is included in a full painting package — the price usually comes out lower than booking it on its own. Tape and fixings are included. Film and cardboard are consumables, charged additionally.
| Service | min | max |
|---|---|---|
| Protection of furniture, doors, windows and floors with film | 10 zł/m² | 15 zł/m² |
| Cleaning and washing walls before painting | 15 zł/m² | 25 zł/m² |
| Filling holes and damages | 20 zł/m² | 35 zł/m² |
| Wall leveling after tile removal | 45 zł/m² | 70 zł/m² |
| Ceiling leveling | 45 zł/m² | 70 zł/m² |
| Priming before painting | 15 zł/m² | 25 zł/m² |
| Gypsum putty application | 55 zł/m² | 90 zł/m² |
| Painting walls / ceilings in one color (2 coats) | 30 zł/m² | 45 zł/m² |
| Painting walls in different colors | 35 zł/m² | 55 zł/m² |
| Oil-based painting | 55 zł/m² | 80 zł/m² |
| Pipe painting (water, heating, gas) | 20 zł/mb | 35 zł/mb |
| Radiator painting | 25 zł | 45 zł |
| Window painting | 150 zł/m² | 300 zł/m² |
| Stripping old paint and varnish from wood | 30 zł/m² | 70 zł/m² |
| Wood impregnation | 45 zł/m² | 75 zł/m² |
| Wallpaper removal | 20 zł/m² | 35 zł/m² |
| Ceiling moulding installation | 30 zł/mb | 55 zł/mb |
How the on-site work goes
- The technician checks the room and identifies what needs protection: floors, furniture, windows, doors, skirting boards, sockets.
- Smaller furniture is taken out, and larger pieces are moved to the middle and covered.
- Floors are protected with film or cardboard, then fixed with masking tape around the edges.
- Door and window frames are covered with film — this keeps off splashes and drips.
- Sockets, switches, and skirting boards are masked separately.
- Every joint is inspected — there should be no gaps between the film and the wall.
- Once painting is finished, the protection is removed carefully and all waste is taken away.
Common customer mistakes (and how to avoid them)
- Putting newspapers on the floor — paint goes straight through, and the paper ends up stuck to the surface.
- Using ordinary tape instead of masking tape — it leaves adhesive marks on frames and windowsills.
- Protecting only the middle of the floor — splashes still travel to the walls, so the corners stay exposed.
- Leaving socket face plates on — paint gets underneath, and later they can’t be removed cleanly.
- Skipping protection for ceiling lights — when the ceiling is painted, the chandelier catches the lot.
- Leaving film in place for several days — moisture underneath can damage parquet flooring.
What to prepare before the technician arrives
- Take all small items out of the room: vases, frames, electronics, decorations.
- Remove curtains and curtain rods if they’ll get in the way.
- Empty the windowsills completely.
- If you have parquet or an expensive floor covering — tell the technician beforehand so we use cardboard instead of only film.
- Make sure there are enough power sockets for lighting (windows will be taped, so there will be less natural light).
- Agree the scope of work in advance: floors only or full protection.
- If more than one room is being painted — tell us straight away, because protection is done one room at a time.
- Send access details: intercom code, parking, floor number.
A real case from Warsaw
A client in Wola booked painting for two rooms and a hallway. To save money, they covered the floors with old bed sheets. After the ceiling was painted, emulsion drops fell onto the laminate — the fabric let it through right away. They had to call us to sort it out: we protected everything properly with film and cardboard, then repainted the ceiling from the beginning. The laminate was saved, but only because the paint was still wet. If it had dried, the marks would have stayed for good. The takeaway is simple: protection is not the place to save money.
Frequently asked questions
Do I need to protect furniture if we’re only painting the ceiling?
Yes. A roller throws paint within a 1–2 metre radius. Even with careful painting, drops still land on furniture and the floor.
What type of film is best?
For floors — thick builder’s film or cardboard. For furniture — thin painter’s film. Newspapers and bed sheets are not suitable.
Is protection included in the painting price?
It depends on the agreement. Protection is often listed as a separate item, but when you order the full package — the total usually comes out lower.
Can we just cover the furniture instead of moving it out?
Yes, large furniture is moved to the centre and covered. Smaller items are better taken out — it’s quicker and cleaner.
How long does it take to protect one room?
30–60 minutes depending on how much furniture is inside and the floor area.
Do you remove the film after the job?
Yes, the protection is removed carefully and the waste is collected. That’s included in the service.
Who does the work
This protective work is done by experienced painters who focus on proper room preparation. We work across all of Warsaw. Call or message us — we’ll tell you what should be covered and how much time the job will need.