Important: before any washing machine repair, disconnect the appliance from the mains and close the water supply. Do not try to take the machine apart yourself: capacitors inside may still hold a charge even after unplugging. A technician works only on fully isolated equipment.
How much does washing machine repair cost
Up-to-date prices are listed in the table below. The final amount depends on the brand, the kind of fault, and whether any parts have to be replaced. Diagnostics are part of the repair price. Spare parts are billed separately. Fixings and consumables are included.
| Service | Price |
|---|---|
| Washing machine pump replacement | 180–430 zł/szt |
| Washing machine heating element replacement | 180–400 zł/szt |
| Water inlet valve replacement (washing machine) | 250–300 zł |
| Shock absorber replacement (washing machine) | 300–400 zł |
| Belt replacement (washing machine) | 250–300 zł |
| Washing machine bearing replacement | 350–800 zł/szt |
| Door lock replacement (washing machine) | 250–300 zł |
| Control module repair (washing machine) | 400–550 zł |
Indicative prices. Ranges for a typical scope. Fixings included, materials separate. Minimum order 300 zł.
Rather hand the job over? More here: home repair service in Warsaw.
How the home repair works
- You explain the issue: what has stopped working, the error code, and when the symptoms first showed up.
- The technician checks the model and brand, and asks for a photo of the data plate.
- Each tradesperson says in their offer when they can come, and you pick the one that suits you.
- At the address, the technician disconnects the machine from electricity and water, then carries out diagnostics.
- Finds the cause: bearings, pump, heating element, door lock, shock absorbers, control board, belt.
- If the part is available, repair is done straight away. If not, it is ordered and a second visit is booked.
- After the repair, a test wash is started to check spin, draining, and that there is no vibration.
Common washing machine owner mistakes
- Overfilling the drum — shock absorbers and bearings wear out twice as quickly, and the machine starts jumping on spin.
- Leaving vibration unchecked: mountings loosen, the machine moves out of place, and hoses get damaged.
- Skipping drain pump filter cleaning: small objects (coins, buttons) end up in the pump impeller.
- Pouring in too much detergent — extra foam clogs hoses and makes rinsing worse.
- Not leaving the door and detergent drawer open, mould and bad smells appear, and the gasket goes black.
- Trying to replace bearings yourself without a puller: this can damage the drum spider.
- Putting off repair when there is a leak — water damages the floor and reaches the electronics.
- Not levelling the machine after fitting: constant vibration ruins the shock absorbers within a year.
What to prepare before the technician arrives
- Write down the error code from the display.
- Take a photo of the data plate (model, serial number — usually on the door or rear panel).
- Unplug the machine and shut off the water supply.
- Make space for access — pull it away from the wall, remove things from the top.
- Take the laundry out of the drum.
- Get cloths and a bowl ready: some leftover water may come out.
- If the machine is built-in, open or remove the fascia.
- Note when the issue began and which programme was running.
- Send access details: intercom code, parking info.
- Combine all appliance jobs into one visit — it works out cheaper.
A real case from Warsaw: washing machine repair
A client in Mokotow said that a Samsung washing machine had begun vibrating strongly and moving during spin. There was no error code on the display. Diagnostics showed that two of the four shock absorbers had lost their stiffness, the machine had been overloaded for several months. On top of that, the transit bolts had never been taken out after installation a year earlier. The technician removed the bolts, replaced both absorbers, and levelled the machine. A test wash at 1200 rpm spin finished without vibration. The full repair took 1.5 hours.
Frequently asked questions
Which washing machine brands do tradespeople repair?
Bosch, Samsung, LG, Electrolux, Whirlpool, AEG, Beko, Indesit, Candy and others.
Is the diagnostic fee separate?
Diagnostics are included in the repair price. If you decide against the repair, you pay only for the call-out.
How long does the repair take?
Most faults are repaired in 1–2 hours. Bearing replacement takes up to 3 hours. Rare parts mean a return visit is needed.
The machine won’t turn on — what could be wrong?
Most often: a faulty door lock, a blown mains filter, or a damaged control board.
Why does the machine jump during spin?
Worn shock absorbers, transit bolts still in place, an uneven floor, or an overloaded drum.
Is it worth repairing an old machine?
If the repair goes above 50% of a new machine’s price, the technician will frankly recommend replacement.
Do tradespeople bring spare parts?
Common parts: pumps, heating elements, door locks, shock absorbers, belts: are often in stock.
What if the machine smells bad?
Run an empty wash at 90°C with a cleaning agent. Wipe the gasket and detergent drawer. If the smell stays, call a technician.
How quickly can a tradesperson come?
It depends on the tradesperson you choose: each one states in their offer when they can come. If it can’t wait, mark the job as urgent in the app. Tradespeople usually charge extra for urgent call-outs.
Who does the work
Washing machine repairs are done by technicians with hands-on experience in servicing household appliances from all major brands. Tradespeople work across all of Warsaw.
Order in the app
Describe the job, add photos and the address. Tradespeople send their own prices and dates, and you pick one of the offers.
Open the app
