How much airless painting costs and when it beats a roller
The cost depends on the area and preparing the space. A sprayer saves time on large even surfaces, so on volume it works out better on time. But spraying needs thorough masking of everything around — the paint travels as a mist, so in small rooms with furniture the prep eats the gain. Paint is billed separately, film is part of the labour. Rates per stage are in the table below.
| Service | Price |
|---|---|
| Covering furniture, doors, windows and floors | 20–25 zł/m² |
| Wall cleaning before painting | 15–25 zł/m² |
| Priming before painting | 8–14 zł/m² |
| Gypsum skim coating | 55–90 zł/m² |
| Walls and ceilings, one colour (2 coats) | 30–50 zł/m² |
| Walls in different colours | 40–60 zł/m² |
Indicative prices. Ranges for a typical scope. Fixings included, materials separate. Minimum order 300 zł.
Add the area to the request and say whether the flat is clear of furniture: painters will advise what pays off more, a sprayer or a roller.
Price ranges and offers from tradespeople: painter and decorator in Warsaw.
How machine painting goes: step by step
- Assessment: whether the site suits spraying (area, whether the flat is clear).
- Thorough masking: floor, windows, non-painted surfaces are fully taped: the mist settles everywhere.
- Wall prep: de-dusting, filling defects, priming.
- Setting up the machine and a test spray to get an even fan.
- Applying two coats with an even motion; corners cut in with a brush if needed.
- Removing the masking, checking under side light, cleaning up.
Common airless mistakes (and how to avoid them)
- Spraying in a room with furniture. The mist settles on everything; without full masking there are splashes everywhere.
- Skimping on masking. Masking is what takes time when spraying; you can’t cut corners on it.
- One pass without a second coat. Even an even fan needs two coats for a dense colour.
- Spraying a small room. On a small area a roller is faster and cleaner.
- Not de-dusting the wall. Spraying doesn’t replace prep: paint holds poorly over dust.
- Poor ventilation. When spraying, ventilation and respiratory protection matter.
What to prepare before the pro arrives
- Clear the flat of furniture if you can: the main advantage for spraying.
- Give the total area to paint.
- Decide on the colour and paint type.
- Remove or prepare for full masking anything not to be painted.
- Provide access to water and electricity.
- Check that ventilation is possible.
- Say whether other work is running at the same time.
- Confirm the lift and parking for bringing in the equipment.
A case from practice in Warsaw
Before moving into a flat in Wola (78 m², no furniture) all the walls and ceilings needed painting white. By roller it would have taken several days. Since the flat was empty, they chose airless spraying: they fully covered the floor and windows with film, de-dusted and primed the walls and applied two coats with the machine. An even coat with no roller marks, the whole flat in a little over a day. The takeaway: on a large clear area spraying is faster and more even; but where there’s furniture and small rooms, a roller is more practical because of the masking.
Frequently asked questions
Why is machine painting better than a roller?
On large clear areas it’s faster and gives an even coat with no roller marks.
When is a roller better?
In small lived-in rooms with furniture: masking for spraying eats the whole gain there.
Do I have to move furniture out for spraying?
Ideally: the paint mist settles on everything. Spraying works best in an empty flat.
Is the coat more even?
Yes, set up correctly the machine gives an even coat with no streaks.
How many coats when spraying?
Usually two — one pass isn’t enough for a dense colour.
Does preparing the space take long?
Masking takes most of the time; on volume it pays off in painting speed.
Does the painter buy the paint?
Whatever is easier. Tradespeople suggest paint suited to spraying. Materials are separate.
What about smell and mist?
When spraying, ventilation and protection matter; they work with airing.
Will the tradesperson clean up afterwards?
Yes, they remove the masking and take away the equipment and waste.
Do tradespeople cover my district?
Tradespeople work across all of Warsaw: Wola, Mokotów, Ursynów and others. Leave a request.
Who does the work and how
The work is done by painters on the platform with their own equipment. A good painter will honestly tell you where a sprayer pays off and where a roller is more practical, without pushing spraying where it isn’t needed. The scope and price are agreed at the inspection. Post a request in the HandyMan24 app: painters will assess the area and suggest a method.
Order in the app
Describe the job, add photos and the address. Tradespeople send their own prices and dates, and you pick one of the offers.
Open the app
