How much does hinge adjustment cost
The price depends on how many doors there are and what state the hinges are in. One door with two hinges is a fast fix. A kitchen with 15 fronts and hinges that have gone loose means a full service visit. Cost also depends on whether worn hinges have to be replaced, whether there are soft-close dampers, and whether the cup fixing in the chipboard needs to be reinforced. Fixings included with the furniture are covered. You can see the current rates in the table below.
| Service | Price |
|---|---|
| Hinge adjustment | 150–350 zł |
| Furniture repair | 200–450 zł |
| Hinge replacement | 60–120 zł/szt |
Indicative prices. Ranges for a typical scope. Fixings included, materials separate. Minimum order 300 zł.
Price ranges and offers from tradespeople: hinge and drawer runner replacement in Warsaw.
How the on-site adjustment works
- You say so in the order what is happening: sagging, misalignment, uneven gap, squeaking, and send a photo if that is easy.
- The technician checks the scope: whether it is one door or all fronts, and whether any hinges need replacing.
- Each tradesperson says in their offer when they can come, and you pick the one that suits you.
- On site the technician checks every hinge: play in the cup, condition of the mounting plate, and how the soft-close spring works.
- The adjustment is made using three screws: vertical (up-down), horizontal (closer/further from carcase), depth (door pressure). Each one is turned with a PZ2 bit.
- After adjusting, they check the result: gaps match at the top and bottom, the door does not rub its neighbour, and the soft-close pulls in smoothly.
- If they find a pulled-out cup or a cracked plate, they can replace it on the spot or note the issue for ordering the part.
Common mistakes when adjusting hinges yourself
- Turning the wrong screw, a hinge has three or four adjustment points, and if you do not know which one does what, you can easily make it worse.
- Using a regular screwdriver instead of PZ2 — this rounds off the screw head and then adjustment becomes impossible.
- Tightening only one of the two hinges: the door looks straight at the top but leans at the bottom.
- Skipping the mounting plate on the side panel: the screw has come loose and the plate has shifted out of place.
- Overlooking stripped holes in chipboard — if the hinge cup is wobbling, adjusting it achieves nothing.
- Spraying WD-40: that is a solvent, not a lubricant. The squeak comes back within a week.
- Forgetting about door weight, a heavy front with a mirror needs reinforced hinges.
What to prepare before the technician arrives
- Point out which doors are causing trouble.
- Empty the affected cabinet, a shelf full of items makes the door drop even more.
- If you know the furniture brand (IKEA, BRW, Agata), add it to the request.
- Check whether the doors still close at all or whether the hinge has pulled out.
- Make sure there is access to the furniture: move chairs, boxes, or anything that blocks the door from opening fully.
- Give the intercom code and parking details.
- If the issue is in the kitchen, clear the worktop near the cabinets.
- Keep pets in a separate room.
- Count the problematic doors — that lets the technician give an exact time estimate.
- Take a close-up photo of the hinge and send it when booking.
A real case from Warsaw: furniture hinge adjustment
A client in the Wola district called about one upper kitchen cabinet door that had dropped. After inspection, it turned out the issue was bigger: the kitchen had 12 fronts, and eight of them had hinges that had not been adjusted in five years. The upper cabinets had Blum soft-close hinges; the lower ones used budget GTV hinges. On two fronts the cups had already started to wobble, the chipboard had swollen from moisture. The technician packed the holes with PVA glue mixed with sawdust, waited 15 minutes for it to set, and then re-drove the cups. All 24 hinges were adjusted in three planes: the gaps became even and the fronts lined up properly. Two GTV hinges with broken springs were replaced. The work took about 90 minutes. The client said the kitchen looked like new.
Frequently asked questions
What hinges do tradespeople adjust?
Any furniture hinge: Blum, Hettich, GTV, Gamet, IKEA, unbranded — the adjustment method is the same.
What is included in the price?
The technician’s labour and tools. Fixings from the furniture kit are included. Hinge replacement and additional fasteners are charged separately.
How long does adjustment take?
One or two doors: 15 to 20 minutes. A full kitchen (10-15 fronts): around an hour.
Can a hinge be adjusted if the hole is stripped?
If the hole is only a little loose, they fill it, let it set, and re-drive it. If the chipboard is badly damaged, a repair plate is required.
Do tradespeople only work on kitchens?
No, they adjust hinges on all cabinet furniture: wardrobes, dressers, TV units, bathroom cabinets, bookcases.
The hinge squeaks — does it need replacing?
Not always. Proper lubrication is often enough. If the mechanism is worn out, then it needs replacement.
Do tradespeople work on weekends?
Yes, Saturdays and Sundays are normal working days. Book ahead.
Who does the work and how a job runs
The adjustments are done by furniture specialists who work with this every day, the same technicians who assemble kitchens and wardrobes. Tradespeople cover all of Warsaw: Mokotow, Wola, Bemowo, Ursynow, Praga, Wilanow, Ochota. Tradespeople show up on time and keep the work tidy.
Order in the app
Describe the job, add photos and the address. Tradespeople send their own prices and dates, and you pick one of the offers.
Open the app
