Furniture hinge replacement in Warsaw: choosing and fitting

How much does hinge replacement cost

The price depends on how many hinges need changing and what type they are. Swapping one standard hinge is a fast job. Replacing all soft-close hinges in a kitchen is another story. The cost is influenced by the hinge type (standard, soft-close, angled, glass-door), the condition of the chipboard seat, and whether re-drilling or a repair plate is required. The hinge itself is charged separately from labour. Current rates are in the table below.

Ordering in the appHinge replacement: what the request looks like in the appFirst the service and a photo: just show the torn out hinge. A price range appears right away. All that’s left is the address and the day. Handymen see the job and each decides whether to take it. Offers with prices land in the app. You pick the one that suits you.Service and a photoAddress and a day that suits youOffers from handymen, you chooseStep 1 of 5FurnitureHinge replacement60–120 zł · per itemHow many?3 pcsEstimate≈ 180–360 złPhotos: show what needs doingNext Step 2 of 5Where?Warsaw, WolaWhen suits you?WeekdayWeekendAny dayDescriptionHinge torn out from a bedroom wardrobe doorSend request 3 offersHinge replacementWarsaw, WolaSentYHYuriy H.320 złI bring my own tools and bits.ChooseMKMarek K.330 złI adjust the doors at the end.ChooseSNSerhiy N.360 złI follow the manufacturer’s instructions.ChooseOrder in the app

Rather hand the job over? More here: hinge and drawer runner replacement in Warsaw.

How the replacement works

1. You explain the issue and send a close-up photo — the technician checks the type and chooses a replacement.
2. If the hinge is non-standard, they order it or tell you where to get it.
3. On site: they take off the door, unscrew the old hinge from the cup and mounting plate.
4. Tradespeople inspect the seat: if the chipboard is loose, they pack the holes with PVA glue and sawdust.
5. Tradespeople fit the new hinge: place the cup, secure it with screws, install the plate.
6. Tradespeople adjust it in three planes so the gaps are even.
7. Tradespeople check the soft-close and test how the door shuts.

Common mistakes when replacing hinges

• Buying hinges without checking the cup diameter (35 mm is standard, but 26 and 40 mm also exist).
• Choosing the wrong mounting type: clip-on, inset, overlay, half-overlay may look alike but they do not swap over.
• Fitting hinges without soft-close where soft-close ones were before — the doors start banging shut.
• Skipping seat repair, a new hinge in a worn-out hole will drop within a month.
• Using the wrong screw size: too long goes through the side panel, too short will not hold.
• Changing only one of two hinges: the load shifts and the second one wears out sooner.

What to prepare before the visit

• Take a close-up photo of the hinge — type, mounting, markings.
• Measure the cup diameter (usually 35 mm).
• Check whether the hinge has soft-close.
• Count how many hinges need replacing.
• Empty the cabinet.
• Say so in the order the furniture brand if known.
• Make sure there is access to the furniture.
• Provide the intercom code.
• If the doors are glass or mirror, mention it in the request: this uses a different hinge type.
• Clear some space for the removed door.

A real case from Warsaw: furniture hinge replacement

A flat owner in the Ursynow district called about his five-year-old IKEA kitchen. Three lower fronts would not shut: the soft-close mechanisms clicked but did not pull the doors closed. The hinges were IKEA UTRUSTA 153 degrees with built-in soft-close. The springs had broken from heavy use. The technician came with a set of Blum CLIP top hinges with separate BLUMOTION soft-close, a full match for the seat dimensions. He replaced six hinges on three fronts and adjusted the rest. The whole job took an hour. The client said the Blum hinges close even softer than the original IKEA ones.

Frequently asked questions

Do tradespeople bring hinges with them?

Yes, they carry the main types: Blum, Hettich, GTV. Non-standard ones they order or advise where to buy.

Can I upgrade from a hinge without soft-close to one with?

Yes, as long as the seat dimensions match (usually a 35 mm cup).

How long does replacement take?

One hinge: 10 to 15 minutes. Seat repair adds 15 to 20 minutes for glue to set.

Is the hinge cost included?

No. Labour is separate, hinges are separate. The technician will show the hinge and quote before fitting.

What if the chipboard around the hinge is destroyed?

Tradespeople fit a repair plate or move the hinge a few centimetres up or down.

Do tradespeople work weekends?

Yes, Saturdays and Sundays are regular working days.

Who does the work

The work is done by furniture specialists with hands-on experience in assembling kitchens, wardrobes, and fitted closets. Tradespeople cover all of Warsaw — Mokotow, Wola, Bemowo, Ursynow, Praga, Ochota.