
Find the cause before picking up a saw
Before anyone takes the leaf off, work out what it is actually rubbing on. A new floor raises the level, so the bottom of the door scrapes along the whole swing. Doors also stick for other reasons, though: they sag on the hinges, swell with bathroom damp, or the frame shifts a little. Cutting the bottom off will not fix any of those, and sometimes makes things worse.
If the floor is the problem, the leaf comes off, the cut line is marked and the door is trimmed on a steady bench or trestles. DRE doors come in several finishes, so the tradesperson picks the method for the door in front of him: tape along the line, a guide rail, a sharp blade. The fresh edge then gets sealed. Bare board on the underside of a bathroom door soaks up moisture and starts to delaminate within a few months.
How much can come off depends on how the leaf is built. The bottom rail of the frame is not tall, and cutting through it exposes the core. With a big height difference, a threshold or a new rail glued in is often the saner option. You only see that once the door is off.
Once the leaf is back on, it is not only the bottom that gets checked. The door should close without a push, the latch should catch, and the gap along the frame should stay even top to bottom. If something is off, that is the moment for a small hinge adjustment, while the tools are still out.
How it looks in the appDoor trimming: from a photo to offersDescribing the job is quick: the service, a photo of the bottom of the door and an estimate on screen. Next come the address and a convenient time. Handymen who work for themselves see the job. You end up with a few offers and decide yourself who to go with.Service and a photoAddress and a day that suits youOffers from handymen, you chooseDescribe the jobPrice ranges and offers from tradespeople: apartment fit-out in Warsaw.
DRE door trimming: common mistakes
- Trimming before every layer of flooring is down. A rug or threshold strip added later eats the gap again.
- Measuring at one point by the hinge. The floor under the swing is almost never flat.
- Cutting without tape, so the finish chips along the edge.
- Leaving the edge unsealed in a bathroom or kitchen.
- Trimming a door that has only sagged, when tightening the hinges would have done it.
DRE door trimming: getting ready
- Finish the floor completely, skirting and thresholds included.
- Check whether the door rubs only at the bottom or also on the frame at the side or top.
- Take a photo of the bottom of the leaf and the mark on the floor.
- Clear somewhere to cut, like a balcony or an empty room.
Squeaks and light rubbing are often easy to fix yourself: how to fix squeaky or sticking doors without replacing them.
Booking it through the app
Describe in the app how many doors are rubbing and after what work, and add photos. Tradespeople reply with bids that carry their own price and timing. Compare them along with ratings and reviews and pick one; phone number and address are shared only after you choose. You pay the tradesperson directly, and he issues the invoice.
Order in the app
Describe the job, add photos and the address. Tradespeople send their own prices and dates, and you pick one of the offers.
Open the appTape and small materials are usually in the price, rubbish removal is charged separately. Whoever made the cut answers for it. An uneven screed and hidden faults in the leaf are not on him.




