After a flood, walls and ceilings are left with yellow-brown stains, blisters and, if not dried, mould. You can’t just paint over them: the stain will bleed through any paint within a couple of weeks. Painting after water damage means drying, removing the blistered finish, a stain-blocking primer over the marks and repainting. If water reached the wiring or the stains are large and wet, first make sure the power is off and the surface is dry. We work across all of Warsaw, including the older stock of Praga and Śródmieście, where leaks from neighbours are common.
How much painting after a flood costs and what drives the price
The price depends on the damaged area and how deep the water went. If the stain is superficial, a stain-blocking primer and paint are enough. If the finish blistered and peeled, removal, filling and levelling are added. Wet and mouldy areas need drying and treatment before painting. Paint and special products are billed separately, while film is part of the labour. Rates are in the table below.
| Service | min | max |
|---|---|---|
| Filling holes and damages | 20 zł/m² | 35 zł/m² |
| Wall leveling after tile removal | 45 zł/m² | 70 zł/m² |
| Priming before painting | 15 zł/m² | 25 zł/m² |
| Gypsum putty application | 55 zł/m² | 90 zł/m² |
| Painting walls / ceilings in one color (2 coats) | 30 zł/m² | 45 zł/m² |
| Cleaning and washing walls before painting | 15 zł/m² | 25 zł/m² |
Important: we only paint over a dry surface. If the wall is still damp, it needs drying first — otherwise the paint and the mould come back.
How the job goes on site — step by step
- Inspection and moisture check. We look at the stain’s edges, blisters and signs of mould, and confirm the surface has dried.
- Removing the damaged finish. Blistered paint and peeling filler are scraped back to a sound base.
- Mould treatment if present. Mouldy spots are cleaned and treated with a product.
- Levelling. Cleaned areas are filled and sanded flush.
- Stain-blocking primer. A blocking primer goes over the stains — without it the yellow mark bleeds through.
- Two coats and a check under side light.
Common mistakes after a flood (and how to avoid them)
- Painting over a wet wall. On an undried surface the paint peels and the mould returns.
- Ordinary primer over stains. The yellow-brown mark bleeds through — you need a stain-blocking primer.
- Ignoring mould. If it isn’t removed and treated, it grows through the new paint.
- Painting over blisters. Peeling finish must be removed, otherwise it falls off with the paint.
- Rushing while it dries. A deeply soaked wall dries for days, sometimes with a moisture meter.
- Not fixing the leak’s cause. If it still leaks, painting is temporary.
What to prepare before the pro arrives
- Make sure the cause of the leak is fixed (neighbour, pipe, roof).
- Cut the power in the zone if water was near the wiring.
- Ventilate and dry the room, remove soaked items.
- Mark all stains and blisters, including on the ceiling.
- Clear access to the damaged walls.
- Say how long ago the flood was and whether the wall has dried.
- Provide access to water and electricity.
- Confirm the lift and parking.
A case from practice in Warsaw
In a flat in Praga the upstairs neighbours flooded the bathroom and hallway: brown stains on the ceiling, blistered paint by a wall and mould starting in a corner. The cause was fixed, but the owners painted the stain straight away with ordinary paint — two weeks later it came back through. We scraped off the blistered finish, treated the corner against mould, filled it, applied a stain-blocking primer over the marks and painted two coats. The stain didn’t return. The takeaway: after a flood it’s not the paint that matters but drying, removing the damage and the blocking primer; without them any stain bleeds through again.
Frequently asked questions
Can I paint over stains with ordinary paint?
No, they’ll bleed through. You need a stain-blocking primer over the mark, then paint.
How long after a flood can you paint?
Only once the wall has dried. Superficial — a few days; deeply soaked — longer.
Will you remove mould?
We clean and treat the mouldy spots before painting.
What about blistered paint?
We scrape it back to a sound base, fill and level — blisters must not be painted over.
What if the wall is still damp?
We can’t paint. It needs drying first; otherwise the paint peels and the mould returns.
Do I need to fix the cause of the leak?
Definitely. If it still leaks, painting will be temporary.
Do you paint stained ceilings?
Yes, the same way: a blocking primer over the stain and two coats.
Do you buy the paint and products?
Whatever is easier. We suggest a blocking primer and paint. Materials are separate.
Will you clean up after yourselves?
Yes, we remove film and tape and take away the waste.
Do you cover my district?
We work across all of Warsaw — Praga, Śródmieście, Mokotów and others. Leave a request.
Who does the work and how
The work is done by pros from the handyman service. After a flood the order matters: drying, removing the damage, mould treatment, a blocking primer and only then painting. We agree the scope and price at the inspection; if the wall is still damp we’ll say honestly that it needs drying first. Leave a request and we’ll assess the damage and advise the order of steps.