How much chandelier installation costs and what affects the price
The price depends on the fixture type (light flush mount, heavy chandelier, LED track), the ceiling type (concrete, plasterboard) and whether there is a ready outlet and hook. Replacing a light at an existing point is cheaper than installing at a new spot with chasing and cable routing. Current rates are in the table below: they quote upfront and you pay after the job. Materials (anchors, connectors, hook) are charged separately.
| Service | Price |
|---|---|
| Socket installation | 30–90 zł/pkt |
| Socket replacement | 50–90 zł/pkt |
| Socket repair | 60–250 zł/szt |
| Light switch installation | 50–90 zł/pkt |
| Light switch replacement | 60–90 zł/pkt |
| Light switch repair | 150–350 zł/szt |
| New electrical point | 150–250 zł/pkt |
| LED transformer installation | 150–220 zł/szt |
| Bulb and halogen replacement | 30–50 zł/szt |
| Power socket installation 230/400 V | 150–350 zł/pkt |
| Connect induction / ceramic hob | 180–350 zł/szt |
| Stove/oven hookup | 200–350 zł |
| Built-in oven installation and connection | 180–420 zł/szt |
| Wall chasing for cables | 40–80 zł/mb |
| Running electrical cables | 15–50 zł/mb |
| Junction box wiring | 80–400 zł/szt |
| Light installation (lamp, chandelier) | 80–550 zł/pkt |
| Light fixture replacement | 150–450 zł/szt |
| Lighting repair | 120–350 zł |
| LED strip installation | 60–90 zł/mb |
Indicative prices. Ranges for a typical scope. Fixings included, materials separate. Minimum order 300 zł.
Rather hand the job over? More here: light fitting in Warsaw.
How the installation visit works
- Tradespeople switch off the circuit at the board and confirm no voltage with a tester.
- Tradespeople identify the wires: live, neutral and protective earth (PE).
- Tradespeople match the fixing to the ceiling: hook, anchor or plugs rated for the fixture weight.
- Tradespeople mount the base/bracket and hang the fixture provisionally.
- Tradespeople connect the wires on a terminal block in the correct order.
- Tradespeople hang the fixture, level it and cover the connections.
- Tradespeople fit the bulbs and test operation with all switches.
Common mistakes (and how to avoid them)
- Installing without switching off the circuit — the most common and most dangerous error.
- Hanging a heavy chandelier on the terminal block alone instead of a hook/anchor.
- Confusing the protective earth (PE) with neutral on old wiring.
- Universal plugs in plasterboard instead of toggle anchors: the fixture works loose.
- No slack in the cable, making the fixture hard to remove later.
- Mounting a metal fixture without connecting the earth.
What to prepare before the technician arrives
- Unpack the light and check the kit (screws, hangers, shades).
- Have bulbs that suit the fixture ready.
- Make sure you can access the consumer unit with labelled circuits.
- Clear the space under the mounting point and protect the floor.
- Check the switch actually controls that point.
- Have the manual ready if the fixture is unusual.
- Allow 45–90 minutes depending on the fixture type.
- Say so in the order if the ceiling is high — they will bring a suitable ladder.
A case from Warsaw: Wola, a living-room chandelier
A client in Wola bought a heavy chandelier and tried to hang it on a plastic terminal block — within a day the fixture began to tilt. He posted a request before it fell.
Tradespeople switched off the circuit, confirmed no voltage and fitted a steel hook anchored into the concrete ceiling. The wires were connected on a new terminal block, earthing the metal body.
After levelling and fitting the bulbs, everything worked from both switches. The visit took about an hour. The takeaway: with heavy fixtures, it is not the wiring that matters most but a secure fixing to the ceiling.
Frequently asked questions
Can I hang a chandelier myself?
A light flush mount at an existing point: usually yes, after switching off the circuit. With a heavy fixture, old wiring or no earth, it is safer to call a technician.
Do tradespeople install into concrete and plasterboard?
Yes. In concrete they use anchors/hooks; in plasterboard, toggle anchors rated for the fixture weight.
What if three unlabelled wires stick out of the ceiling?
Tradespeople test them and identify live, neutral and earth. That is a standard step of safe installation.
Will the tradesperson connect a remote or dimmable light?
Yes, they install remote-controlled and dimmer-compatible fixtures: the bulbs need to be dimmable too.
Will the tradesperson replace an old light with a new one?
Yes, removing the old and fitting a new one at the same point is a typical job.
Do I need bulbs?
Yes, ideally have suitable ones ready — then they test operation right away.
Do tradespeople install LED tracks and panels?
Yes, besides chandeliers they fit flush mounts, tracks and LED panels.
How long does installation take?
Usually 45–90 minutes, depending on fixture weight and ceiling type.
Do tradespeople cover Praga, Ursynów, Białołęka?
Yes, they serve all of Warsaw and the surrounding area.
Does the tradesperson issue an invoice?
Yes, they issue a VAT invoice on request.
Who does the installation and how a job runs
Light fixtures are installed by technicians on HandyMan24 experienced in electrical work. Tradespeople always work with the circuit switched off, confirm no voltage and ensure correct earthing. They arrive at the agreed time, quote upfront and tidy up after themselves. You pay the tradesperson directly. For more serious work on the wiring they always explain the scope first.
Need a chandelier hung or unclear wires in the ceiling? Leave a request online: they will install it safely and test it.
Order in the app
Describe the job, add photos and the address. Tradespeople send their own prices and dates, and you pick one of the offers.
Open the app
